Crown XTi 6000

6000W 2 Channel Amplifier w/ DSP

(Note: This amplifier is rated for operation on a 20A circuit. We offer the availability to operate on a 15A circuit with limited output, approximately 3/4 power output)

Includes:

5ft 12awg C19 Power Cable

20A - 15A Adapter (if needed)

2x 25ft XLR Microphone Cable

Features:

Output Power:

2 ohm Stereo (per channel); 3000W

4 ohm Stereo (per channel); 2100W

8 ohm Stereo (per channel); 1200W

4 ohm Bridge-Mono; 6000W

8 ohm Bridge-Mono; 4200W

Voltage Gain at 1kHz: 37.1 dB

Frequency Response: +0/–1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.

Load Impedance: Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode.

Sensitivity: 1.4V

Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 103 dB (A weighted).

Damping Factor: Better than 500 from 20 Hz to 400 Hz.

Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.

Input Stage: Input is electronically balanced and employs precision 1% resistors.

Input Impedance (nominal): 20 k ohms, balanced; 10 k ohms, unbalanced.

Maximum Input Signal: +22 dBu typical.

AC Line Voltage and Frequency Configurations Available: 100V, 120V, 220-240V 50/60 Hz.

AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 15.3A; at idle draws no more than 180 watts.

Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).